top of page

Is Rubio Monocoat Worth It?

As you begin to consider the best wood finish for your project, you may ask yourself, is Rubio Monocoat worth it? That question depends on what feature you look at and what features or benefits you desire or expect from a wood finishing product.


Let's take a closer look at our Oil Plus 2C and examine some of those features



0% VOC

0% VOCs means there are no VOCs in the formulation of the Oil Plus 2C. The products does not emit VOCs in the space where the product is applied or where the finished wood is places after the application.


That results in a very safe work enviroment and living environment without exposure to VOCs.



Single Coat Application

The Oil Plus 2C are single coat products. Our oils are not your typical brush-on varnish or stain. This product is applied in a fashion that does not build up a film but leaves a hand-rubber type of wood finish application. So no film-build at all.


You may be wondering if you need to apply a finish over this product for protection. To answer you question, no, you do not need to apply any sort of finish.


The oils are based on a unique molecular bonding technology that does not require a topcoat application at all. Instead, the product provides superior protection (despite only needing a one-step application) of the wood surface compared to other oils and/or penetrating -oil wood finishes.


Labour and Time Savings

Due to the single coat application process, there is the benefit of considereable time and labour cost savings over more traditional oils or polyurethane finishes. Typically, you are required to apply a 2-3 coat system with these traditional finishes to achieve adequate finishing levels.



Quick Curing

Oil Plus 2C is supplied as a two-component product. The B-Component is called 'Accelerator B,' and gets added at a 3:1 ratio (Oil: B Component). When this B component is added to the A component, it accelerates the Oil Plus 2C's drying and curing time. It is sped up to just five days (under favourable conditions) instead of 3 weeks when the oil is used by itself as a single component wood finish (like on light duty use project such as picture frames, etc). Adding Accelerator B also provides better performance and protection than when the Oil Plus A component is used and applied by itself. We always recommend that both components are used together for best performance when applied to heavy use substrates such as floors and tables. It is also recommended for surfaces exposed to heavy use such as kitchen cabinets, counters or bathrooms.


Once applied, the two-component oil mixture is typically 80% cured after just 48 hours under favourable drying and curing conditions.



Inconvenience and Downtime Are Limited For Property Owners

Because Oil Plus 2C has only a minimal odor, is 0% VOC and has quick curing time, homeowners may move furniture in as soon as the third day after the application on their wood floors. However, you do not want to place area rugs on oiled wood floors until after the curing process is complete.



Natural Look & Feel

The most appealing feature of Oil Plus 2C is its very natural look and feel. Its matte sheen level and smooth feel provide the perfect wood finish for individuals who prefer a hand-rubbed finishing level. Rubio Monocoat's hardwax oils do not provide film-build when properly applied. There is nothing wrong with that look, but nowadays, many individuals prefer and are looking for a non-build building wood finish with a natural hand-rubbed appearance.



Does Not Peel or Flake

Rubio Monocoat does not peel or flake off from the wood surface because of the non-film forming nature of the hardwax oil system. Film building wood finishes like polyurethane run a risk of this since each application must adhere to the previously applied coating. If anything is wrong with that, then adhesion loss like peeling or flaking is likely to occur.


With Rubio Monocoat hardwax oil, this will not be a problem. Even with future maintenance applications, this does not happen. Each future maintenance application only nourishes the previously applied product without leaving any film build. Please remember that it is required to remove all excess oil from the surface.



Plant Based

The oils used in the formulation and manufacturing of Rubio Monocoat wood finish oils are based on natural ingredients. This means that the product is very safe to use and is equally safe for your environment. In addition, Oil Plus 2C's certifications allow it to be an ideal wood finish for food-contact surfaces or kids furniture!



Repairable

Rubio Monocoat hardwax oil products are very easy to repair. Touchup work, if required, is easy to accomplish. Prepare the localized spot that needs some care with the same sanding procedure as initially done. Next, clean then apply some oil in the same colour as original applied, and rub it in. Lastly, wipe the surface dry with a rag and allow it to dry. In most cases, that is all that is needed.



Colour Variety

The great thing that sets Rubio Monocoat apart is that the interior oil comes in an extensive range of colours, 55 to be precise! All those colours may be intermixed with each other, so literally, thousands of colours may be created this way! We also offer several Pre-Treatment products that further add to the wide range of colour options!



So, is our products really worth it? We think so! With all these great benefits, you can't go wrong!


6 views0 comments

Recent Posts

See All

コメント


bottom of page